Wednesday, 24 June 2009

Fiber to my Home, the installation in home

Today fiber was installed in my home. You've seen the previous installments how fiber was just outside my front door. Today the last meter was bridged. This was done by a company called Schuuring. They apparantely are looking for more people to help out.  Two people came. One made sure that the fiber got from the front door to the utilities closet. The second guy did the final work, make the fiber ready for use.

The first guy
He started with opening the latch to the area between the floor and the ground, there is some space there to crouch. After this he opened up the stones in the street and dug a small hole to get the slack fiber from under the pavement. 


From Fibre to my Home
There is about 10m slack available
From Fibre to my Home

A hole is drilled in the outside wall to bring the fiber in. The fiber is run through and the hole is filled with some kind of elastic glue.

From Fibre to my Home
From Fibre to my Home
From Fibre to my Home
The slack is fed into the crouching space and left there. The last two meter is pushed upwards into the utilities closet.

From Fibre to my Home

The first guy is then almost finished. He cleans up after himself, hammers the stones back in. Tells the second guy that he has chipped a stone and promises that it will be replaced. His final task is to leave a plastic bag with a connection set for the second guy. Good thing to know. If the first guy doesn't hammer the stones back in properly and I would complain later on, than he has to come back on his own dime and fix the problem. So he was committed to hammering the stones back into the pavement the right way. (In 5 years time those stones will hover above the rest of the pavement I expect :-) )All in all this took about 15-20 minutes.

From Fibre to my Home
From Fibre to my Home

The second guy
The second guy came about half an hour later. He told me that they had been told not to allow pictures as some of the stuff was proprietary and "copyrighted". He was a young guy and I don't want to bring him into trouble. It seems Arcadis checks up on their work and well. Arcadis developed an online model for the Ministery of Economic Affairs which you can use to calculate the costs of installing a fiber network in The Netherlands. I used it for the calculations in my OECD paper.

I did get some pictures of his kit and the way the fiber was installed. The install itself takes less then 15 minutes and is mostly aimed at getting various layers of the fibers and then connecting the fiber to the connectors (which come with fiber attached). That then is put into the metering closet in the grey cabinet.
From Fibre to my Home


From Fibre to my Home
The splicer! Very cool with a small LCD screen.
From Fibre to my Home
The whole shebang installed in my utility closet. Next to it you can see my Alice DSL modem.

From Fibre to my Home
From Fibre to my Home
The Finished product.

The guy gave me some interesting information as well. An installer is required to do 11 installs per day. Homes like mine are easy. and they can do 20 of them on a good day. High Rise is difficult and takes more time. Older homes are also a pain. they sometimes need to drill straight from outside into the living room. A max of 6db signal loss is allowed. They try to do alot less, between 1 and 3. All in all the installation took only 15 minutes.

The line also needed to be tested. For this he used a unit by Kingfisher, pretty standard. What took the most time was getting someone on the phone at the central office. Those guys need to connect about 200 homes per day and they can be quite busy. There are 2 guys per central office. If someone finds a way in which the central office testing can be automated, that would be a great benefit. In my opinion. If you can get a testing unit to which you can hook up 500 to a thousand homes and have it communicate with the testing unit (or wirelessly to the guys mobile phone) that would be a major improvement to their workflow. Anything around 5 to 10 thousand euro would probably be worth the investment.

All in all this bit took another 15 minutes. 10 minutes for the waiting 5 for the testing.

Now I need to wait for KPN or Online to come up with a symmetrical offer for broadband to my home. Or shall I punish KPN and go for UPC for one year??

Bonus pictures
A picture of how Reggefiber promotes that people have signed up for fiber (glasvezel) in Zeewolde.
From Fibre to my Home

And some pictures of someone sitting in a tent in the street hooking up the fibers from individual homes to the main duct.
From Fibre to my Home
From Fibre to my Home
From Fibre to my Home
From Fibre to my Home

3 comments:

  1. Just signed up for the KPN silver package this week. Let you know what it is like when it is installed. (fibre has been in for about 6 months) They say it will be awhile because so many are signing up, but I saw that as a sales ploy.
    Anyway, apparently they will be getting BBC soon, also. Sure hope so!

    ReplyDelete
  2. Here in Stockholm, in Sweden we pay about 45 USD/month for a 100/100 Mbps fibre to the home.

    http://www.blixtvik.se

    ReplyDelete